What To Do When Your Washing Machine Does Not Spin Or Agitate?

Once you start using a washing machine, there are some common problems that begin to rise due to its regular usage. While some can be fixed easily, some problems may need you to look for LG Washing Machine Repair in Hyderabad to get them fixed. Here are some of the tips you could follow in the meanwhile to get your washing machine to spin or agitate.

First, to see what the problem is and where it lies, perform the following.

Check your washing machine’s spin cycle. If it works, it means that the motor is operating well and the belt is not broken. In case the spin cycle does not work, the belt may be broken or might have become loose. Tighten the belt or replace it with a new one.

Check the lid switch along with the tab on the lid. If the plastic tab is broken, the washer may stop for a bit during cycles. In this case, press the switch and release it. If it does not work even this, it means the lid is broken, and you can replace it with a new one.

In case these two measures do not work, then there might be a problem with the controls or the agitator, and you should call a repair service.

When Washing Machine is not Spinning

If the washing machine seems to complete all of its cycles but does not spin:

Check if the clothes are unbalanced or have jammed in the drum. Unbalanced clothes may also cause the washer to shudder. Open the lid and put the clothes properly which will automatically reset a switch, and close the lid. Even after straightening out the load, the washer does not stop shaking, look at the feet, and make sure they are properly adjusted to keep the washer at a level on the floor.

Check the lid switch along with the tab on the lid. If the plastic tab is broken, the washer may stop for a bit during cycles. In this case, press the switch and release it. If it does not work even this, it means the lid is broken, and you can replace it with a new one.

In case these two measures do not work, then there might be a problem with the controls or the agitator, and you should call a repair service.

When Clothes do not Spin Dry

Lift the lid while the spin cycle is on. If the tub it does not spin, the motor coupler might be damaged. Call a Samsung Washing Machine repair in Hyderabad and have them check the washer once again.

In case the tub is spinning, check the load again to make sure it is balanced. If you are sure that the load is balanced, but the clothes are still coming out dripping, there might be a problem with either the motor pulley, belt, tub bearing, or clutch and you may have to replace it.

Samsung Washing Machine Repair in Hyderabad

Make sure the drain hose is not kinked. After that,  check the tab on the lid that strikes its switch. In case the lid is broken, the washer might stop during the drain cycle. Press and set free the lid switch. If it does not click when you do it, it is probably broken. In that case, remove the switch, check it, and replace it with a new one if needed.