Stuck with the Netgear routerlogin.net not working issue? If the answer to the question is yes, then know that you needn’t worry as we’re here to assist you. In this article, we’ve shed light on the top 5 troubleshooting tips that’ll surely help you in accessing the web user interface of your Netgear WiFi router without any hassle.
But, before you get down to the troubleshooting tips, ensure that you are using the correct username and password to log into your home router. Also, disconnect your device from VPN connections and disable all ad-blocking extensions.
Now, you are ready to proceed. So, with no further discussion, scroll down, and read on.
Read Also: Muffy Animal series
Resolved: Netgear Routerlogin.net Not Working Issue
- Restart the Nighthawk Router
Most of the time, users face issues while trying to login into their router because of a technical glitch. In order to get rid of this technical glitch, you need to simply restart your Netgear WiFi router.
Here’s how to restart your Netgear Nighthawk router step-by-step:
- Power off your WiFi device.
- Disconnect the power cable from the router.
- Wait for approximately 30 seconds before proceeding further.
- Then, plug the power cable back into the router.
- Press the Power button on and wait for the LED light to turn solid green.
Once you’ve successfully restarted your device, try to perform Netgear Nighthawk router login. If you aren’t able to, then continue reading.
- Change the Mode of Connection
Another reason why you may have encountered the routerlogin.net not working issue is because of a weak internet connection. Thus, ensure that the connection between your home router and modem is strong.
In case you are facing issues with the wireless connection between your WiFi devices, then it is recommended that you make use of an Ethernet cable to log into your router.
- Use an Updated Web Browser
Your mobile device starts working slowly because of pending updates, right? Similarly, you aren’t able to access the routerlogin.net administrative page because of an outdated web browser. Therefore, update the web browser you’re using from time to time.
If updating the web browser doesn’t work in your favor, then try clearing its cache, cookies, and browsing history. Or even better, you can try accessing the routerlogin.net web through incognito mode.
Still no luck? Well, then it’s time that you jump to the next troubleshooting step.
- Switch to a New Web Browser
If updating the web browser, clearing its cache, and using the incognito window didn’t work, then why don’t you switch to a completely new web browser?
Surely, taking this one step will make the job easier for you. In case, using a different browser seems like a big deal, then you can switch to another device. For example, if you were using your computer earlier, make use of an Android now. Simple.
- Reset the Netgear Nighthawk Router
None of the aforementioned tips were of help to you? Well, looks like there’s just one option left for you to try. And that is, restoring your Netgear WiFi router to its factory default settings.
Mentioned below are the guidelines that you need to follow in order to update the reset the Netgear Nighthawk router for good:
- Ensure that your home router is powered on.
- Disconnect it from devices like computers and mobile phones.
- Locate the Reset button at the bottom of your WiFi device.
- Once found, carefully press it using a paper clip.
- Hold the button for about 7 to 8 seconds and release it.
Once you reset your Nighthawk router, you’ll have to follow the instructions on the www.routerlogin.net setup wizard to install your device from scratch. Once you do, see whether the issue of routerlogin.net not working has left you or not. If not, then it is recommended that you get in touch with our experts immediately.